The traffic light manufacturer says the attention of non-motor vehicle installation

Instructions for vehicle traffic lights:

1, height of non-motorized traffic lights in the general case, 2.5 ~ 3 meters, if choose in use of motor vehicle lights light pole cantilever device a non-motor vehicle lights, plant height and motor vehicle lights are the same.

2, non-motor vehicle driveways azimuth signal device, should make the yellow signal light axis pointing to the front from the horizontal spacing of 25 m of lamps and lanterns, the lamps and lanterns of the non-motor vehicle lanes controlled by center distance road surface height is 1.6 m.

In the other side of the bridge, a non-motor signal light group should be added on the other side of the flyover bridge.

4, turn left at the don't need a separate control of motor vehicle traffic flow, vertical device, traffic signal lamp color put order by down, should be red, yellow, green put order.

5, when a motor vehicle parking line and to the interval of non-motorized traffic lights more than 50 m, should be to install a new import a non-motor vehicle headlamp unit, signal device before import parking line 0.8 ~ 2 m place, away from the curb on the right side of interval is 0.8 ~ 2 m of pavement or non-motor vehicle lanes within the barrier on the left side of the machine.

6, in the absence of motor vehicles and non-motor vehicle domestic barriers way, non-motorized traffic lights set appropriate chooses attached type device, the device on the guidance of motor vehicle traffic signal lamp post.